| Age | Commit message (Collapse) | Author |
|---|
|
piem-am-read-worktree isn't a good name because it doesn't provide any
information to distinguish this function from any other function used
for piem-am-read-worktree-function.
Message-Id: <20211229235036.372313-2-kyle@kyleam.com>
|
|
piem-edit stores the format returned by piem-am-ready-mbox in a
buffer-local variable, piem-edit-patch--format. However,
piem-edit-patch-am doesn't use this value when it calls piem-am,
instead passing a hard-coded "mbox".
Pass piem-edit-patch--format so that git-am is called with the
appropriate format.
Cc: Leo <sourcehut@relevant-information.com>
Message-Id: <20211228170417.216825-1-kyle@kyleam.com>
|
|
Sometimes it is necessary to edit patches before applying them. These changes
allows you to do that by providing a new command `piem-edit` that
shows the buffer that is prepared by `piem-am-ready-mbox` to the user.
[km] Fixed let-binding in piem-edit-patch-am.
Message-Id: <20211221140212.30248-1-sourcehut@relevant-information.com>
|
|
piem--merge-config-inboxes determines public-inbox's configuration
file by using PI_CONFIG if set, falling back to the hardcoded
location. piem-lei.el will need to do the same, so move the logic
into a function.
Message-Id: <20211025035630.297598-9-kyle@kyleam.com>
|
|
Expose (most if not all) relevant arguments of lei-q in a new
transient. The only somewhat tricky part here is propagating the
original arguments so that piem-lei-query-thread and
piem-lei-query-show can find messages that require a non-default
source (e.g., an unregistered external or a remote source when there
are local externals configured).
While remote operations work, the current design is still focused on a
setup where externals are configured locally, as described in
<20210605211402.20304-1-kyle@kyleam.com> (e.g., there's no attempt to
limit the number of times the server is hit).
Using the key 's' (for search) is unfortunate given the
command name is `lei q', but I think that's better than using 'q',
which is pretty widely used for "quit" in Emacs buffers.
Message-Id: <20211025035630.297598-7-kyle@kyleam.com>
|
|
mail-parse.el defines mail-decode-encoded-word-string as an alias for
rfc2047-decode-string. Use the higher-level wrapper for the reasons
described in (emacs-mime)Interface.
Message-Id: <20210923012353.256964-1-kyle@kyleam.com>
|
|
A client may mirror and configure inboxes locally. Doing so enables
fast local access to public-inbox-httpd and public-inbox-nntpd. And
with the next pubic-inbox release (v1.7), it will be necessary to set
up local externals for lei.
That can lead to a good amount of information being duplicated between
the piem-inboxes option and ~/.public-inbox/config. To avoid this,
let users set an option to enable collecting information from
public-inbox's configuration.
This relies on code getting the list of inboxes with
piem-merged-inboxes rather than inspecting piem-inboxes directly.
That should be okay because at this point there should be very few
third-party callers. An alternative would be to merge values from the
configuration into the value of piem-inboxes. That'd let callers
continue to inspect public-inboxes, but I'd prefer not to touch the
value of a user option.
Message-Id: <20210610185943.14155-5-kyle@kyleam.com>
|
|
The properties of piem-inboxes align with public-inbox-config names to
keep things consistent, which is especially important given the
upcoming support of reading inboxes from public-inbox's configuration.
However, :coderepo, which needs to point to a working tree, doesn't
nicely match publicinbox.$inbox.coderepo, which points to another
section that in turn must point to a .git directory.
I'm still undecided on whether using a different name (e.g.,
:code-working-tree) would be clearer, but at least document the
difference to hopefully avoid some confusion.
Message-Id: <20210610185943.14155-4-kyle@kyleam.com>
|
|
A coderepo is by definition a directory. Append a trailing separator
so that callers don't have to worry about normalizing it.
Message-Id: <20210610185943.14155-3-kyle@kyleam.com>
|
|
piem-inbox-coderepo-maybe-read deals with a code repository but
confusingly calls it "inbox".
Message-Id: <20210610185943.14155-2-kyle@kyleam.com>
|
|
|
|
|
|
If the gunzip call fails, piem-gunzip-buffer says "Decompressing
t.mbox.gz failed". All the piem-gunzip-buffer callers at the moment
do use to decompress t.mbox.gz downloads, but that's of course not
something this function should assume or know about.
Message-Id: <20210523214623.31331-6-kyle@kyleam.com>
|
|
Now that piem-gunzip-buffer handles the check for the gunzip
executable, there's not much point in having a dedicated function.
Message-Id: <20210523214623.31331-5-kyle@kyleam.com>
|
|
Make piem-gunzip-buffer handle the executable check so that callers
don't have to worry about it.
Message-Id: <20210523214623.31331-4-kyle@kyleam.com>
|
|
piem-download-and-decompress calls url-retrieve-synchronously, checks
for a 200 status, and then manually removes the header. This works
okay, but it'd be good for the error handling to match what's done by
url-insert-file-contents.
Introduce a new macro that largely copies what is done by
url-insert-file-contents. The main difference is that url-insert is
used instead of url-insert-buffer-contents so that the contents can be
inserted literally.
This approach is based on Emacs's 5f9671e57e
(lisp/emacs-lisp/package.el: Fix decoding of downloaded files,
2019-05-18).
Message-Id: <20210523214623.31331-3-kyle@kyleam.com>
|
|
When piem is loaded, piem-use-magit is enabled if Magit has already
been loaded. This approach is potentially confusing: a user may want
to use Magit, be happy that it seems to just work, and then confused
when it doesn't work in some later session where loading Magit happens
to not be triggered before loading piem.
All the relevant sites have fboundp guards (and those are cheap), so
there's no advantage to disabling this if Magit isn't enabled at load
time. Set piem-use-magit to t by default.
Message-Id: <20210522203905.16504-3-kyle@kyleam.com>
|
|
This option isn't really about using Magit wherever possible, but, as
the manual already states, using Magit for some user-facing
operations.
Message-Id: <20210522203905.16504-2-kyle@kyleam.com>
|
|
Previously the user was able to configure a maildir to inject threads
into, but the user might want the maildir to be different depending
on which mailing list the threads was coming from.
With the `:maildir` keyword, users can configure the maildir on a
per-list basis. If there is not `:maildir` configured for a mailing
list, it will fallback to the value of `piem-maildir-directory`.
Message-Id: <702dccedfc5e67a41bb0dd58fe66af6e3f204bb5.1615568004.git.public@yoctocell.xyz>
|
|
|
|
Transient 0.3.0 was just released. Require it, and stop using now
obsolete macros.
Message-Id: <20210222034807.23437-1-kyle@kyleam.com>
|
|
piem-copy-mid-url will usually be called through piem-dispatch, which
is autoloaded, so autoloading piem-copy-mid-url doesn't matter in that
context, but users are of course free to bind/call piem-copy-mid-url
directly.
|
|
I don't use EWW as my default browser for browse-url, but, for
public-inbox HTTP access, I primarily use EWW. Add an option that
makes it easier to do so without adding lots of regular expressions to
browse-url-browser-function.
Message-Id: <20210207075738.8752-5-kyle@kyleam.com>
|
|
I find the notmuch-show-stash-mlarchive-link-and-go command useful.
It's like notmuch-show-stash-mlarchive-link but calls browse-url on
the copied URL.
Make piem-copy-mid-url do the same when given a prefix argument.
Message-Id: <20210207075738.8752-4-kyle@kyleam.com>
|
|
piem-notmuch configures notmuch-show-stash-mlarchive-link-alist with a
custom piem function that's useful for grabbing the pubic-inbox URL.
Add a command to piem-dispatch that provides similar functionality.
Message-Id: <20210207075738.8752-3-kyle@kyleam.com>
|
|
There are two spots that use (piem-inbox-get :url ...) and
piem-escape-mid to construct the public-inbox link, and there is about
to be another. Extract this shared logic.
Cc: Xinglu Chen <public@yoctocell.xyz>
Message-Id: <20210207075738.8752-2-kyle@kyleam.com>
|
|
I considered having each contributor keep their own copyright line for
each file up to date (like in Guix), but I don't want to have to
remember to pester patch submitters for that in reviews. Instead go
with a public-inbox-inspired "all contributors".
|
|
Add support for reading directory using project.el.
project.el is a built-in library that offers similar functionality to
projectile. It is also available on GNU ELPA.
[km: repositioned fboundp call]
Message-Id: <8ce1733ac0d0f63622d9060015949f31ce83d6ee.1612294275.git.public@yoctocell.xyz>
|
|
It's faster and to my eyes slightly more readable.
This changes the behavior of piem--ensure-trailing-slash for the edge
case of "/". While I think the new behavior makes more sense, it
doesn't matter in practice.
|
|
piem--write-mbox-to-maildir finds the bounds for each message by doing
a plain search for "From mboxrd@z", but of course nothing prevents
that from being within the text of the message. Anchor it to the
start of the line to prevent false positives.
Message-Id: <20210119054042.11985-1-kyle@kyleam.com>
|
|
With the previous commit, -notmuch more closely follows -gnus in its
handling of attachments (e.g., getting the content with
mm-display-inline). Replace piem-am-patch-attachment-p with a helper
that has this shared logic.
Message-Id: <20210104015435.18397-4-kyle@kyleam.com>
|
|
piem-extract-mbox-info feeds the "from" header value through
rfc2047-decode-string, but the same treatment should be applied to
other header values.
Message-Id: <20210103063425.22718-1-kyle@kyleam.com>
|
|
|
|
|
|
94d0281 (process buffer: Add time to header, 2020-11-27) was just
supposed to add a "time:" field, but it also dropped the leading "\n".
Add it back, and also avoid the unnecessary concat call.
Message-Id: <87h7ovstub.fsf@kyleam.com>
|
|
Recording the time makes it easier to digest and group the subprocess
commands when inspecting the buffer later.
Message-Id: <20201127205815.17313-1-kyle@kyleam.com>
|
|
The dispatch transient is under the "Patch handling" section, which
doesn't really fit because it already has a command that isn't related
to patch handling (piem-inject-thread-into-maildir) and will gain
more.
|
|
When inspecting attachments for generating an am-ready mbox, both
-notmuch and -gnus limit the operation to attachments with text/x-diff
or text/x-patch content types. That has worked okay for me, though
I've run into a few cases where I couldn't apply a patch attachment
because it had a text/plain content type.
To do something useful in this case, check the file name to see
whether it looks like a patch.
Message-Id: <20201122204609.12604-5-kyle@kyleam.com>
|
|
This will gain another condition. Avoid repeating it across two
spots.
Message-Id: <20201122204609.12604-3-kyle@kyleam.com>
|
|
I tend to use a few dedicated worktrees for projects and am not
interested in creating a worktree for each patch series I apply.
However, I can imagine wanting to create one every now and then. Make
it possible by adding a prefix argument to piem-am and
piem-b4-am-from-mid that flips the meaning of piem-am-create-worktree.
Message-Id: <20201115061518.22191-6-kyle@kyleam.com>
|
|
It seems likely that piem-am-read-worktree won't quite behave as some
callers want. Let users specify a custom function.
Message-Id: <20201115061518.22191-5-kyle@kyleam.com>
|
|
On the guix-patches list, simon described a workflow in which a new
worktree is used to apply patches. Such a workflow is fairly
straightforward to support in piem-am (and thus piem-b4-am-from-mid).
Aside form reading the worktree from the caller, the main change
needed is to replace 'git checkout (-b BRANCH|--detatched) [base]'
with 'git worktree add (-b BRANCH|--detatched) PATH [base]'.
Teach piem-am to use a worktree when piem-am-create-worktree is
non-nil.
Suggested-by: zimoun <zimon.toutoune@gmail.com>
Ref: https://yhetil.org/guix-patches/86361cys9h.fsf@tournier.info
Message-Id: <20201115061518.22191-4-kyle@kyleam.com>
|
|
This will be needed in another spot.
Message-Id: <20201115061518.22191-3-kyle@kyleam.com>
|
|
Describing CODEREPO in terms of where git-am is called is a bit
confusing because piem-am does other things here as well (e.g. reading
the base and checking out a branch). And it won't necessarily be
where git-am is called once worktree support is added.
Give a more generic description.
Message-Id: <20201115061518.22191-2-kyle@kyleam.com>
|
|
A standard prefix command would do, but since piem-b4 already depends
on transient, use transient here as well to provide a more helpful
interface.
Message-Id: <20201109030034.11429-1-kyle@kyleam.com>
|
|
Let-bind mail-extr-ignore-realname-equals-mailbox-name to nil
(defaults to t) so that a sender name is returned for addresses like
"name <name@a.com>" and "name@a.com".
Also, let-bind mail-extr-ignore-single-names to its default value of
nil so that a user setting this option to t doesn't interfere with
piem-name-branch-who-what-v.
Message-Id: <20200921032214.16940-1-kyle@kyleam.com>
|
|
These aren't too useful (and I don't want to duplicate what is or at
least should be in the manual), but they're better than nothing.
|
|
|
|
<blush>
|
|
Message IDs can include characters that must escaped before being
included in the path part of public-inbox URLs. Add a variant of
url-hexify-string that uses the same set of characters as
public-inbox's mid_escape().
Message-Id: <20200919044639.26871-2-kyle@kyleam.com>
|