| Age | Commit message (Collapse) | Author |
|---|
|
I considered having each contributor keep their own copyright line for
each file up to date (like in Guix), but I don't want to have to
remember to pester patch submitters for that in reviews. Instead go
with a public-inbox-inspired "all contributors".
|
|
Add support for reading directory using project.el.
project.el is a built-in library that offers similar functionality to
projectile. It is also available on GNU ELPA.
[km: repositioned fboundp call]
Message-Id: <8ce1733ac0d0f63622d9060015949f31ce83d6ee.1612294275.git.public@yoctocell.xyz>
|
|
It's faster and to my eyes slightly more readable.
This changes the behavior of piem--ensure-trailing-slash for the edge
case of "/". While I think the new behavior makes more sense, it
doesn't matter in practice.
|
|
piem--write-mbox-to-maildir finds the bounds for each message by doing
a plain search for "From mboxrd@z", but of course nothing prevents
that from being within the text of the message. Anchor it to the
start of the line to prevent false positives.
Message-Id: <20210119054042.11985-1-kyle@kyleam.com>
|
|
With the previous commit, -notmuch more closely follows -gnus in its
handling of attachments (e.g., getting the content with
mm-display-inline). Replace piem-am-patch-attachment-p with a helper
that has this shared logic.
Message-Id: <20210104015435.18397-4-kyle@kyleam.com>
|
|
piem-extract-mbox-info feeds the "from" header value through
rfc2047-decode-string, but the same treatment should be applied to
other header values.
Message-Id: <20210103063425.22718-1-kyle@kyleam.com>
|
|
|
|
|
|
94d0281 (process buffer: Add time to header, 2020-11-27) was just
supposed to add a "time:" field, but it also dropped the leading "\n".
Add it back, and also avoid the unnecessary concat call.
Message-Id: <87h7ovstub.fsf@kyleam.com>
|
|
Recording the time makes it easier to digest and group the subprocess
commands when inspecting the buffer later.
Message-Id: <20201127205815.17313-1-kyle@kyleam.com>
|
|
The dispatch transient is under the "Patch handling" section, which
doesn't really fit because it already has a command that isn't related
to patch handling (piem-inject-thread-into-maildir) and will gain
more.
|
|
When inspecting attachments for generating an am-ready mbox, both
-notmuch and -gnus limit the operation to attachments with text/x-diff
or text/x-patch content types. That has worked okay for me, though
I've run into a few cases where I couldn't apply a patch attachment
because it had a text/plain content type.
To do something useful in this case, check the file name to see
whether it looks like a patch.
Message-Id: <20201122204609.12604-5-kyle@kyleam.com>
|
|
This will gain another condition. Avoid repeating it across two
spots.
Message-Id: <20201122204609.12604-3-kyle@kyleam.com>
|
|
I tend to use a few dedicated worktrees for projects and am not
interested in creating a worktree for each patch series I apply.
However, I can imagine wanting to create one every now and then. Make
it possible by adding a prefix argument to piem-am and
piem-b4-am-from-mid that flips the meaning of piem-am-create-worktree.
Message-Id: <20201115061518.22191-6-kyle@kyleam.com>
|
|
It seems likely that piem-am-read-worktree won't quite behave as some
callers want. Let users specify a custom function.
Message-Id: <20201115061518.22191-5-kyle@kyleam.com>
|
|
On the guix-patches list, simon described a workflow in which a new
worktree is used to apply patches. Such a workflow is fairly
straightforward to support in piem-am (and thus piem-b4-am-from-mid).
Aside form reading the worktree from the caller, the main change
needed is to replace 'git checkout (-b BRANCH|--detatched) [base]'
with 'git worktree add (-b BRANCH|--detatched) PATH [base]'.
Teach piem-am to use a worktree when piem-am-create-worktree is
non-nil.
Suggested-by: zimoun <zimon.toutoune@gmail.com>
Ref: https://yhetil.org/guix-patches/86361cys9h.fsf@tournier.info
Message-Id: <20201115061518.22191-4-kyle@kyleam.com>
|
|
This will be needed in another spot.
Message-Id: <20201115061518.22191-3-kyle@kyleam.com>
|
|
Describing CODEREPO in terms of where git-am is called is a bit
confusing because piem-am does other things here as well (e.g. reading
the base and checking out a branch). And it won't necessarily be
where git-am is called once worktree support is added.
Give a more generic description.
Message-Id: <20201115061518.22191-2-kyle@kyleam.com>
|
|
A standard prefix command would do, but since piem-b4 already depends
on transient, use transient here as well to provide a more helpful
interface.
Message-Id: <20201109030034.11429-1-kyle@kyleam.com>
|
|
Let-bind mail-extr-ignore-realname-equals-mailbox-name to nil
(defaults to t) so that a sender name is returned for addresses like
"name <name@a.com>" and "name@a.com".
Also, let-bind mail-extr-ignore-single-names to its default value of
nil so that a user setting this option to t doesn't interfere with
piem-name-branch-who-what-v.
Message-Id: <20200921032214.16940-1-kyle@kyleam.com>
|
|
These aren't too useful (and I don't want to duplicate what is or at
least should be in the manual), but they're better than nothing.
|
|
|
|
<blush>
|
|
Message IDs can include characters that must escaped before being
included in the path part of public-inbox URLs. Add a variant of
url-hexify-string that uses the same set of characters as
public-inbox's mid_escape().
Message-Id: <20200919044639.26871-2-kyle@kyleam.com>
|
|
|
|
Using the second group in piem-link-re is not reliable because the
trailing part of the URL may be anything. Instead get the inboxes
:url first and then generate a regular expression that has that value
as the prefix.
Message-Id: <20200828031920.7515-5-kyle@kyleam.com>
|
|
All the callers at the moment only care about the current inbox, but
this is still useful for avoiding a repeated call to piem-inbox (and
an upcoming commit will use it to do so).
Message-Id: <20200828031920.7515-4-kyle@kyleam.com>
|
|
There's no need to have a function like piem-inbox-url for every key.
Drop piem-inbox-url, but keep piem-inbox-coderepo around because it
does a bit of extra processing on top.
Message-Id: <20200828031920.7515-3-kyle@kyleam.com>
|
|
piem-elfeed-get-inbox and piem-eww-get-inbox match the URL against
piem-link-re and take the second group as the inbox name. That's a
bad approach because the inbox name in the URL doesn't necessarily
match the one in piem-inboxes. For example, public-inbox's own
archive is https://public-inbox.org/meta/, but my entry in
piem-inboxes uses the name "public-inbox":
("public-inbox" :url "https://public-inbox.org/meta/" ...)
The approach also fails if the URL isn't a public-inbox message URL
because piem-link-re isn't very specific. (That will be improved in
an upcoming commit.)
Find the inbox name by matching the buffer URL against the :url values
in piem-inboxes.
Message-Id: <20200828031920.7515-2-kyle@kyleam.com>
|
|
piem-download-and-decompress uses url-retrieve and a callback, setting
url-asynchronous to nil. This approach doesn't seem to be sufficient
because I'm getting intermittent failures in piem-b4--get-am-files
related to unfinished processes. And taking a peek at
url-retrieve-synchronously suggests that indeed a good amount more is
needed to do a synchronous call with url-retrieve.
Switch piem-download-and-decompress over to
url-retrieve-synchronously. I haven't noticed any issues with the
url-retrieve call in piem-inject-thread-into-maildir, but switch that
over too for simplicity and consistency.
Message-Id: <20200828025605.1106-1-kyle@kyleam.com>
|
|
In 846c69c (b4: Try to download thread from piem-inboxes URL,
2020-08-16), the "Maildir injection" section gained code that's used
more widely. Move it to its own section.
|
|
Notmuch users can set piem-mail-injection-skipif-predicate to the new
function.
Message-Id: <20200822190130.20397-4-kyle@kyleam.com>
|
|
piem-inject-thread-into-maildir allows pulling a thread from a
public-inbox URL, but repeating the process to get new messages in the
thread leads to duplicates in the local store. Add a predicate that
the caller can configure to avoid this.
Note that the predicate has the entire message available to make its
decision, but it's called with the message ID for convenience because
that's likely the only information needed to determine if the message
is already in the local store.
Message-Id: <20200822190130.20397-3-kyle@kyleam.com>
|
|
The message is going to get longer when skip counts are reported, so
try to save some characters.
Message-Id: <20200822190130.20397-2-kyle@kyleam.com>
|
|
If a call to piem-b4-am-from-mid fails to generate the thread for a
message ID via piem-mid-to-thread-functions, b4 is called without a
local mbox. In this case, b4 tries to download the thread from the
URL specified by b4.midmask in the caller's Git configuration.
That works, but it's inconvenient because the user needs to configure
the URL in two places. If the current buffer is associated with an
inbox in piem-inboxes, try to download the thread from its :url before
falling back to b4's midmask.
Message-Id: <20200817013343.15615-6-kyle@kyleam.com>
|
|
An upcoming commit will use this same logic in another callback.
Message-Id: <20200817013343.15615-4-kyle@kyleam.com>
|
|
This will be needed in another spot.
Message-Id: <20200817013343.15615-3-kyle@kyleam.com>
|
|
Message-Id: <20200817013343.15615-2-kyle@kyleam.com>
|
|
The other methods return expanded absolute paths. Do the same here.
Message-Id: <20200816185130.32703-4-kyle@kyleam.com>
|
|
When piem-inbox-coderepo-maybe-read is called from within a project,
the current project isn't included in the collection because
projectile-relevant-known-projects excludes it when
projectile-current-project-on-switch is at its default value. That's
undesirable in this context; if there's a current project, it's likely
the one of interest (e.g., calling piem-b4-am-ready-from-mbox from a
project's directory).
Add the current project to the collection and make it the default.
Also, don't bother going down the projectile branch if there are no
known projects.
Message-Id: <20200816185130.32703-3-kyle@kyleam.com>
|
|
While it's possible that the caller wants to specify a path for a repo
that isn't yet registered as a project, it should be quite rare, and
disabling it decreases the chances of invalid input.
Message-Id: <20200816185130.32703-2-kyle@kyleam.com>
|
|
Message-Id: <20200816185130.32703-1-kyle@kyleam.com>
|
|
When called interactively, piem-am retrieves the mbox with
piem-am-ready-mbox. As piem-am-ready-mbox's docstring says, the
caller is responsible for cleaning up the buffer. Make piem-am do so
to avoid leaving a hidden buffer around for each mbox applied.
Message-Id: <20200811043220.14679-1-kyle@kyleam.com>
|
|
0ee97e9 (Explicitly specify --patch-format in git-am calls,
2020-08-09) made it possible for a piem-am-ready-mbox-functions member
to specify the format of the mbox by returning (FUNCTION FORMAT). If
FUNCTION is returned, then mboxrd is supposed to be taken as the
default format. The handling is broken, though, because
piem-am-ready-mbox tries to detect the (FUNCTION FORMAT) form with
listp, but that of course also returns true when the return value is
simply a function.
Instead, check to see whether the element matches a valid format
value. Switch from (FUNCTION FORMAT) to (FUNCTION . FORMAT) to make
it more convenient to pull out FORMAT with cdr-safe.
Message-Id: <877du5c1nz.fsf@kyleam.com>
|
|
The sources of mbox patches fed to git-am are 1) threads downloaded
from a public-inbox HTTP instance, 2) mboxes generated via
piem-mid-to-thread-functions, and 3) those generated via
piem-am-ready-mbox-functions. The first source should always be
mboxrd. For the second, piem-notmuch-mid-to-thread is currently the
only function suitable for piem-mid-to-thread-functions, and it uses
mboxrd. The third source is a mix between mbox and mboxrd.
By default, git-am tries to auto-detect the patch format, but let's
explicitly specify --patch-format to avoid any incorrect guesses.
Message-Id: <20200810020704.30150-1-kyle@kyleam.com>
|
|
|
|
I hit into a type error by calling piem-am, without thinking, on an
attachment of a plain diff.
|
|
I think I left this out initially with the idea that the user can (and
should) set am.threeWay to true. But I can't come up with a reason
why a caller wouldn't want to fall back to a 3-way merge [*], so pass
--3way as an explicit argument to benefit users that haven't
configured am.threeWay. Now that piem-am-args exists, a user can
always remove it if desired.
[*] And magit-am has had --3way on by default for a long time; I don't
recall any complaints.
|
|
It's tempting to define a transient for piem-am and let that handle
the arguments, but doing so only takes care of the case where piem-am
is the entrypoint, not piem-b4-am---which is already a transient with
b4 arguments. And it's not yet clear whether many users will need to
modify that these arguments across different calls (e.g., based on
conventions across different projects). For my purposes, a single set
of arguments is fine.
For now, add a defvar so that there's at least something to latch onto
if someone needs to modify the arguments unconditionally or via a
let-binding.
|
|
For the remaining commands that don't use Magit, it doesn't seem worth
introducing a separate code path. These don't interact with the
caller, and it'd be unnecessarily confusing to have different output
destinations (piem's process buffer versus Magit's) depending on the
value of piem-use-magit.
|