aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-15manual: Fix a typoKyle Meyer
2020-11-08Add a dispatch transient for commandsKyle Meyer
A standard prefix command would do, but since piem-b4 already depends on transient, use transient here as well to provide a more helpful interface. Message-Id: <20201109030034.11429-1-kyle@kyleam.com>
2020-10-25b4: Remove temporary directory on "missing mbox" errorKyle Meyer
As of 30defdb (b4: Clean up temporary directories by default, 2020-09-27), piem-b4-am-from-mid is supposed to clean up its temporary directory unless piem-b4-keep-temp-directory is non-nil. That commit, however, missed an error case where the cleanup function needs to be triggered. Message-Id: <20201025192111.27439-1-kyle@kyleam.com>
2020-10-08Makefile: Specify --css-file for HTML manualKyle Meyer
2020-09-27b4: Clean up temporary directories by defaultKyle Meyer
Each piem-b4-am-from-mid call works in a new temporary directory. Aside from debugging, there's no reason to keep these directories around, polluting temporary-file-directory. Message-Id: <20200927061446.2301-1-kyle@kyleam.com>
2020-09-24Makefile: Fix clean rule change from previous commitKyle Meyer
2020-09-22Makefile: Add docs target that includes split HTML outputKyle Meyer
2020-09-22manual: Set top node for URL outputKyle Meyer
By default the HTML dir link points to /dir/index.html, which doesn't exist in the case of docs.kyleam.com. Point docs.kyleam.com/ instead.
2020-09-21manual: Add section on applying patches without public-inboxKyle Meyer
Message-Id: <20200921045801.24501-1-kyle@kyleam.com>
2020-09-21piem-name-branch-who-what-v: Relax sender name extractionKyle Meyer
Let-bind mail-extr-ignore-realname-equals-mailbox-name to nil (defaults to t) so that a sender name is returned for addresses like "name <name@a.com>" and "name@a.com". Also, let-bind mail-extr-ignore-single-names to its default value of nil so that a user setting this option to t doesn't interfere with piem-name-branch-who-what-v. Message-Id: <20200921032214.16940-1-kyle@kyleam.com>
2020-09-20elfeed: Fix unreferenced variableKyle Meyer
1000739 (Unescape message IDs extracted from URLs, 2020-09-19) incorrectly/embarrassingly used the variable name from piem-eww-get-mid.
2020-09-19Fill in missing library commentariesKyle Meyer
These aren't too useful (and I don't want to duplicate what is or at least should be in the manual), but they're better than nothing.
2020-09-19piem.el: Add homepage to headerKyle Meyer
2020-09-19piem.el: Fix typo in library descriptionKyle Meyer
<blush>
2020-09-19Unescape message IDs extracted from URLsKyle Meyer
All downstream code expects unescaped message IDs. Message-Id: <20200919044639.26871-3-kyle@kyleam.com>
2020-09-19Escape message IDs when constructing URLsKyle Meyer
Message IDs can include characters that must escaped before being included in the path part of public-inbox URLs. Add a variant of url-hexify-string that uses the same set of characters as public-inbox's mid_escape(). Message-Id: <20200919044639.26871-2-kyle@kyleam.com>
2020-09-10Update defgroup info linksKyle Meyer
When 05f3ca5 (manual: A rough and incomplete start, 2020-08-25) fleshed out the skeleton a bit, the individual nodes for the integration libraries got dropped and the one for b4 got renamed.
2020-09-07Define Guix package to set up development environmentKyle Meyer
2020-09-06Release version 0.1.0v0.1.0Kyle Meyer
2020-09-06Drop version header from most librariesKyle Meyer
I haven't decided how I want to deal with packaging, but in any case there's no point in having a version heading for each library. Keep the one in piem.el since there's no *-pkg.el file (at this point, at least).
2020-09-01manual: Clarify descriptions of b4-am commandsKyle Meyer
Avoid presenting the two am-ready variants as though they are early stopping variants of piem-b4-am-from-mid. That's inaccurate, as they don't go through any of the handling in piem-b4--get-am-files and are meant to map directly to `b4 am [options] MID' and `b4 am [options] --use-local-mbox=FILE'. Also expand piem-b4-am-from-mid's description, hopefully providing a better picture of what it's doing on top of a plain `b4 am' call. Message-Id: <20200901032239.25361-1-kyle@kyleam.com>
2020-08-31manual: Fix typoKyle Meyer
2020-08-28elfeed, eww: Be stricter about the returned message IDKyle Meyer
Using the second group in piem-link-re is not reliable because the trailing part of the URL may be anything. Instead get the inboxes :url first and then generate a regular expression that has that value as the prefix. Message-Id: <20200828031920.7515-5-kyle@kyleam.com>
2020-08-28piem-inbox-{codrepo,get}: Allow caller to specify inboxKyle Meyer
All the callers at the moment only care about the current inbox, but this is still useful for avoiding a repeated call to piem-inbox (and an upcoming commit will use it to do so). Message-Id: <20200828031920.7515-4-kyle@kyleam.com>
2020-08-28Add accessor for piem-inboxesKyle Meyer
There's no need to have a function like piem-inbox-url for every key. Drop piem-inbox-url, but keep piem-inbox-coderepo around because it does a bit of extra processing on top. Message-Id: <20200828031920.7515-3-kyle@kyleam.com>
2020-08-28elfeed, eww: Don't assume inbox name in piem-inboxes and URL matchKyle Meyer
piem-elfeed-get-inbox and piem-eww-get-inbox match the URL against piem-link-re and take the second group as the inbox name. That's a bad approach because the inbox name in the URL doesn't necessarily match the one in piem-inboxes. For example, public-inbox's own archive is https://public-inbox.org/meta/, but my entry in piem-inboxes uses the name "public-inbox": ("public-inbox" :url "https://public-inbox.org/meta/" ...) The approach also fails if the URL isn't a public-inbox message URL because piem-link-re isn't very specific. (That will be improved in an upcoming commit.) Find the inbox name by matching the buffer URL against the :url values in piem-inboxes. Message-Id: <20200828031920.7515-2-kyle@kyleam.com>
2020-08-28README: Update manual URLKyle Meyer
2020-08-27Switch downloads to url-retrieve-synchronouslyKyle Meyer
piem-download-and-decompress uses url-retrieve and a callback, setting url-asynchronous to nil. This approach doesn't seem to be sufficient because I'm getting intermittent failures in piem-b4--get-am-files related to unfinished processes. And taking a peek at url-retrieve-synchronously suggests that indeed a good amount more is needed to do a synchronous call with url-retrieve. Switch piem-download-and-decompress over to url-retrieve-synchronously. I haven't noticed any issues with the url-retrieve call in piem-inject-thread-into-maildir, but switch that over too for simplicity and consistency. Message-Id: <20200828025605.1106-1-kyle@kyleam.com>
2020-08-26manual: Add chapter on piem-inject-thread-into-maildirKyle Meyer
2020-08-25README: Link to online manualKyle Meyer
2020-08-25README: Bring a link target inlineKyle Meyer
2020-08-25README: Update description of statusKyle Meyer
2020-08-25manual: A rough and incomplete startKyle Meyer
2020-08-25Split a code sectionKyle Meyer
In 846c69c (b4: Try to download thread from piem-inboxes URL, 2020-08-16), the "Maildir injection" section gained code that's used more widely. Move it to its own section.
2020-08-23notmuch: Extract "known message?" logic to functionKyle Meyer
Notmuch users can set piem-mail-injection-skipif-predicate to the new function. Message-Id: <20200822190130.20397-4-kyle@kyleam.com>
2020-08-23inject: Support skipping messagesKyle Meyer
piem-inject-thread-into-maildir allows pulling a thread from a public-inbox URL, but repeating the process to get new messages in the thread leads to duplicates in the local store. Add a predicate that the caller can configure to avoid this. Note that the predicate has the entire message available to make its decision, but it's called with the message ID for convenience because that's likely the only information needed to determine if the message is already in the local store. Message-Id: <20200822190130.20397-3-kyle@kyleam.com>
2020-08-23inject: Abbreviate piem-maildir-directory in messageKyle Meyer
The message is going to get longer when skip counts are reported, so try to save some characters. Message-Id: <20200822190130.20397-2-kyle@kyleam.com>
2020-08-17b4: Try to download thread from piem-inboxes URLKyle Meyer
If a call to piem-b4-am-from-mid fails to generate the thread for a message ID via piem-mid-to-thread-functions, b4 is called without a local mbox. In this case, b4 tries to download the thread from the URL specified by b4.midmask in the caller's Git configuration. That works, but it's inconvenient because the user needs to configure the URL in two places. If the current buffer is associated with an inbox in piem-inboxes, try to download the thread from its :url before falling back to b4's midmask. Message-Id: <20200817013343.15615-6-kyle@kyleam.com>
2020-08-17b4: Use a clearer variable nameKyle Meyer
Message-Id: <20200817013343.15615-5-kyle@kyleam.com>
2020-08-17Extract logic from inject-thread-callbackKyle Meyer
An upcoming commit will use this same logic in another callback. Message-Id: <20200817013343.15615-4-kyle@kyleam.com>
2020-08-17Move "has gunzip?" check to helperKyle Meyer
This will be needed in another spot. Message-Id: <20200817013343.15615-3-kyle@kyleam.com>
2020-08-17Use url-http-end-of-headers move to payloadKyle Meyer
Message-Id: <20200817013343.15615-2-kyle@kyleam.com>
2020-08-16piem-inbox-coderepo-maybe-read: Expand paths from projectileKyle Meyer
The other methods return expanded absolute paths. Do the same here. Message-Id: <20200816185130.32703-4-kyle@kyleam.com>
2020-08-16piem-inbox-coderepo-maybe-read: Include current projectile projectKyle Meyer
When piem-inbox-coderepo-maybe-read is called from within a project, the current project isn't included in the collection because projectile-relevant-known-projects excludes it when projectile-current-project-on-switch is at its default value. That's undesirable in this context; if there's a current project, it's likely the one of interest (e.g., calling piem-b4-am-ready-from-mbox from a project's directory). Add the current project to the collection and make it the default. Also, don't bother going down the projectile branch if there are no known projects. Message-Id: <20200816185130.32703-3-kyle@kyleam.com>
2020-08-16piem-inbox-coderepo-maybe-read: Require projectile project matchKyle Meyer
While it's possible that the caller wants to specify a path for a repo that isn't yet registered as a project, it should be quite rare, and disabling it decreases the chances of invalid input. Message-Id: <20200816185130.32703-2-kyle@kyleam.com>
2020-08-16piem-inbox-coderepo-maybe-read: Reject invalid empty-string inboxKyle Meyer
Message-Id: <20200816185130.32703-1-kyle@kyleam.com>
2020-08-11piem-am: Clean up hidden buffers produced by interactive callsKyle Meyer
When called interactively, piem-am retrieves the mbox with piem-am-ready-mbox. As piem-am-ready-mbox's docstring says, the caller is responsible for cleaning up the buffer. Make piem-am do so to avoid leaving a hidden buffer around for each mbox applied. Message-Id: <20200811043220.14679-1-kyle@kyleam.com>
2020-08-10Fix handling of -am-ready-mbox valuesKyle Meyer
0ee97e9 (Explicitly specify --patch-format in git-am calls, 2020-08-09) made it possible for a piem-am-ready-mbox-functions member to specify the format of the mbox by returning (FUNCTION FORMAT). If FUNCTION is returned, then mboxrd is supposed to be taken as the default format. The handling is broken, though, because piem-am-ready-mbox tries to detect the (FUNCTION FORMAT) form with listp, but that of course also returns true when the return value is simply a function. Instead, check to see whether the element matches a valid format value. Switch from (FUNCTION FORMAT) to (FUNCTION . FORMAT) to make it more convenient to pull out FORMAT with cdr-safe. Message-Id: <877du5c1nz.fsf@kyleam.com>
2020-08-10Explicitly specify --patch-format in git-am callsKyle Meyer
The sources of mbox patches fed to git-am are 1) threads downloaded from a public-inbox HTTP instance, 2) mboxes generated via piem-mid-to-thread-functions, and 3) those generated via piem-am-ready-mbox-functions. The first source should always be mboxrd. For the second, piem-notmuch-mid-to-thread is currently the only function suitable for piem-mid-to-thread-functions, and it uses mboxrd. The third source is a mix between mbox and mboxrd. By default, git-am tries to auto-detect the patch format, but let's explicitly specify --patch-format to avoid any incorrect guesses. Message-Id: <20200810020704.30150-1-kyle@kyleam.com>
2020-08-09Convert unnecessary let* to letKyle Meyer