| Age | Commit message (Collapse) | Author |
|---|
|
We already do this automatically elsewhere, so this causes a problem if
we do it again.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Start a test suite for generated mbox files.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
In order to avoid some of the more obscure charset encoding problems, we
switched to using as_string() for generating messages before saving them
in an mbox file. However, this uncovered a bug where the unixfrom was
not actually generated and saved, despite as_bytes() and as_string()
supposedly behaving identically.
See:
https://docs.python.org/3/library/email.message.html#email.message.EmailMessage.as_string
This commit fixes the problem by properly setting the unixfrom and using
the recommended (and hopefully less buggy) email.generator interface
when saving mailboxes.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Since we're not caring about 2.x compatibility, pytest seems to be a
good candidate for this job. Obviously, there's a lot of ground to
cover, but the goal is to do all future modifications with tests added
so we can reduce regressions.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Fixes things that should have been fixed in 0.4.5.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When returning sloppy trailers, make sure we always return a 4-member
list, which includes the provenant LoreMessage itself.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Returning a simple list of messages from get_am_ready broke a few other
auxiliary functions invoked when run with -o- or -Q.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
This is a kludge that I'm putting in place to avoid hitting an encoding
bug with Python. We really shouldn't be making a fake RFC2822 message
just so we can parse it again right away, so this is a temporary measure
until I refactor how it's done.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
I'm not sure if it's a good strategy to use GitHub usernames and
username@github.com addresses for this purpose, as we really need to be
able to reach someone when we process their submissions. However, for
the time being at least don't output None.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
You can now do "b4 pr https://github.com/foo/bar/pull/NNN" and have it
fetched into FETCH_HEAD. However, this also works when combined with
--explode, which is the main reason for this feature's existence.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If the FETCH_HEAD is not signed, then keyid is going to be None. Don't
attempt to look up UIDs in such situations.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
I've been working on a way to automatically convert pull requests into
series, complete with mailing them out to arbitrary destinations. This
would allow folks to send a pull request to a dedicated list and have it
automatically converted into a well-formed series.
This is a tentative implementation that relies on git-send-email to do
most of the heavy lifting. I have misgivings about using git-send-email
for this purpose, but it does reduce the amount of duplicated code we
would have otherwise had to write, and allows us to hook into things
like tocmd/cccmd, etc.
For example, adding the following to your .git/config:
[sendemail "autopr"]
smtpserver = [your.server.here]
smtpserverport = 587
smtpencryption = tls
smtpuser = [your-user]
smtppass = [your-pass]
transferEncoding = 8bit
suppressFrom = yes
confirm = never
validate = no
tocmd = "$(git rev-parse --show-toplevel)/scripts/get_maintainer.pl --norolestats --nol"
cccmd = "$(git rev-parse --show-toplevel)/scripts/get_maintainer.pl --norolestats --nom"
This would allow doing the following:
b4 pr -e -f "AutoPR Exploder <autopr@yourdomain.here>" -s autopr [--dry-run]
The pull request will be exploded into a patch series and sent to all
the proper destinations as returned by get_maintainer.pl. We construct
the message headers in a way that allow regular code review and "b4 am"
usage after the auto-exploded series is sent out.
If testing goes well, we'll implement this as a kernel.org service and
then hook a similar implementation via Gitlab/Github.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
This moves maildir saving code into __init__.py so that we can benefit
from it via other subcommands, such as pr.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
PyCharm is unhappy with PEP conformance, so shuffle things around a bit
to satisfy it.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Fixes "NOKEY" vs. "BADSIG" problem (again).
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We can pass a logger object to dkim.verify() which will be used to
report internal errors and debugging info. This can be helpful when
investigating DKIM verification issues but is probably not wanted during
normal operation so the log level of each message is reset to DEBUG.
Each message is also prefixed with 'DKIM: ' to identify its origin when
debug output is enabled.
Signed-off-by: Paul Barker <paul@pbarker.dev>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210607100252.8253-3-paul@pbarker.dev
|
|
As recently found in patatt [1], mail gateways and archivers may mangle
headers like DKIM-Signature if they are sent as an excessively long
line. An example of this occuring was found when the DKIM-Signature
header generated by Microsoft Office 365 collided with the
header re-encoding performed by lists.sr.ht when generating mbox
archive files. This encoding causes dkim.verify() to fail.
The Python email.header module provides the decode_header() and
make_header() functions which can be used to handle MIME encoded-word
syntax or other header manglings which may occur. Fixing up the header
content using these functions before calling dkim.verify() allows the
verification to succeed.
[1]: https://lore.kernel.org/tools/20210531140539.7630-1-paul@pbarker.dev/
Signed-off-by: Paul Barker <paul@pbarker.dev>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210607100252.8253-2-paul@pbarker.dev
|
|
Identity verified in person!
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Identity not validated, but key retrieved from keys.openpgp.org, which
performs an email roundtrip check.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Fixes wrong error message for keys coming from default keyring.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When we discover that a message can only be attested after we trim the
body, we *must* set the body to that version, otherwise an attacker
could append arbitrary content past the l= value boundary. We already do
this in the current form, but we weren't properly handing in-body
headers like From: and Subject: that are used to indicate to git the
patch author vs. committer.
This patch set fixes that and also streamlines a few other places where
we were already relying on git mailinfo calls.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Before:
✓ [PATCH v2 1/8] selftests/x86: Test signal frame XSTATE header corruption handling
✓ [PATCH v2 2/8] x86/fpu: Prevent state corruption in __fpu__restore_sig()
✓ [PATCH 3/8] x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
✓ [PATCH 4/8] x86/fpu: Limit xstate copy size in xstateregs_set()
✓ [PATCH v2 5/8] x86/fpu: Sanitize xstateregs_set()
✓ [PATCH 6/8] x86/fpu: Add address range checks to copy_user_to_xstate()
✓ [PATCH 7/8] x86/fpu: Clean up the fpu__clear() variants
✓ [PATCH 8/8] x86/fpu: Deduplicate copy_xxx_to_xstate()
After:
✓ [PATCH v2 1/8] selftests/x86: Test signal frame XSTATE header corruption handling
✓ [PATCH v2 2/8] x86/fpu: Prevent state corruption in __fpu__restore_sig()
✓ [PATCH v1->v2 3/8] x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
✓ [PATCH v1->v2 4/8] x86/fpu: Limit xstate copy size in xstateregs_set()
✓ [PATCH v2 5/8] x86/fpu: Sanitize xstateregs_set()
✓ [PATCH v1->v2 6/8] x86/fpu: Add address range checks to copy_user_to_xstate()
✓ [PATCH v1->v2 7/8] x86/fpu: Clean up the fpu__clear() variants
✓ [PATCH v1->v2 8/8] x86/fpu: Deduplicate copy_xxx_to_xstate()
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When a message has a developer signature but is failing the signature
check, rerun it again with trim_body. If that passes, we know that the
signature is failing due to mailing list junk appended to the bottom of
the message. In that case, automatically trim the message body so we
have exactly what the developer attested and signed.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Now that we can save as maildirs, add them to gitignore as well.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
The cache aging for threads was not running resulting in failures to
fetch new messages in threads. Fix the empty cache check which should
be for no '.msgs' directories.
Fixes: 4950093c0c3e ("Don't use mboxo for anything")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210601200835.940887-1-robh@kernel.org
|
|
Fixes public key lookups for uncommitted keys.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
save_git_am_mbox() replaces 'From mboxrd@z ' with 'From git@z ' to
make it clear that the output format is not mboxrd. However, all
occurrences in the message are replaced, corrupting patches that
contain 'From mboxrd@z '. Restrict the replacement to the first line
of the message.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210528042635.24959-1-kyle@kyleam.com
|
|
I think we are ready to go with the 0.7.0 release. There's always more
tweaks to add, but at this point we can benefit from wider usage.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
The -f and -l flags are mostly used for archival purposes -- they allow
to convert a pull request into a mini-archive which includes relevant
discussions around all of the commits involved in it.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When the signature is validated using the default keyring, run an
additional check on the UIDs and show the discrepancy if the identity
used in the X-Developer-Signature header is different from the UIDs we
have on the key.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
- the default attestation policy is now "softfail"
- include instructions about installing the patatt submodule
Better read-the-docs style documentation will be coming in 0.8.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
The newer version of public-inbox is not injecting its own List-Archive
headers, so stop relying on it for any purpose.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Normally, -f would be 'Some Service <service@example.org>', but in case
it's just "service@example.org", wrap it in angle brackets properly.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When we're retrieving linked messages, make sure we don't clash with the
variable holding the overall mbox.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
This version returns a failure early when body modification is
recognized. This is especially useful if we have to shell out to gnupg
for validation.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Calling b4-am with --use-local=MBOX is supposed to abort with "Could
not find MID in MBOX" if the mbox doesn't contain the specified
message ID. As of 4950093c0 (Don't use mboxo for anything,
2021-05-18), a type error is signaled because get_strict_thread()
returns None when there are no matches, and get_msgs() feeds this
result to len().
Update get_msgs() to instead check whether the returned value
evaluates to false.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210523025812.26456-1-kyle@kyleam.com
|
|
Minor bugfix release with better error messages for installs without any
keys and unconfigured git.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Be a bit more discerning about the header matches for lore.kernel.org.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If we haven't been able to retrieve any messages, then exit early.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Our version of public-inbox still adds List-* headers of its own. This
is gone in the newer version, so strip these in hopes that this helps
verify more DKIM signatures.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We only really need 0.2, but 0.4 implements DKIM slightly more properly.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
There will be more keyring operations supported in the future, probably,
but for now just move the --show-keys subcommand from "mbox" to "kr".
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
A series may not have a cover letter, so properly handle that situation.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Not really necessary, but let's keep them synced across major versions.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We may not have an lmsg[0], so check for that.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If we come across an obsoleted-by trailer, and we're not running with
--checknewer, then output a warning that there is a newer revision.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When processing -P_, filter by that msgid (and its follow-ups) early on,
instead of parsing the entire thread and only then looking for matches.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Per discussion on the users list, add initial support for the
"Obsoleted-by" trailer that points at the new revision for the series
instead of doing a blind match by subject+from.
Probably buggy and needs better support for series number collisions
(right now we don't check if the newly retrieved series has a revision
number greater than the revision we already have).
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When cherrypicking by msgid and with multiple revisions available, make
sure that we pick the series revision that actually contains the msgid
being cherrypicked.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
It probably doesn't matter for b4 usage, but the maildir standard
requires that files are written to tmp first and then moved into new (or
hardlinked, really, then removed from tmp). Since nothing is reading the
dir we're writing to, it's not as important to fully follow the
standard when it comes to hardlinking, but let's at least move them into
place once writing is completed.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|