Age | Commit message (Collapse) | Author |
|
It has been a common request to support partial series rerolls where
someone sends an amended patch as a follow-up to a previous series,
e.g.:
[PATCH v3 1/3] Patch one
[PATCH v3 2/3] Patch two
\- Re: [PATCH v3 2/3] Patch two
Looks good, but please fix this $small_thing
\- [PATCH v4 2/3] Patch two
[PATCH v3] Patch three
Previously, b4 refused to consider v4 as a complete new series, but now
it will properly perform a partial reroll, but only in the cases where
such patches are sent as follow-ups to the exact same patch number in
the previous series:
[PATCH v3->v4 1/3] Patch one
[PATCH v4 2/3] Patch two
[PATCH v3->v4 3/3] Patch three
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/CAPcyv4ggbuHbqKV33_TpE7pqxvRag34baJrX3yQe-jXOikoATQ@mail.gmail.com
|
|
With multiple entry points for calling get_msgid(), we may end up trying
to read stdin multiple times. Call it once to ensure that this doesn't
happen.
Suggested-by: Morten Linderud <foxboron@archlinux.org>
Improved-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/tools/87im4fi55o.fsf@kyleam.com
|
|
Seems we have lost this check in the rewrite, so restore it to make sure
that we only check dkim if b4.attestation-check-dkim == 'yes' (default).
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Look in all of the brackets and reconstitute the subject based on what
we find there. This way we properly handle even the following:
Subject: [foo-list] [PATCH [RFC] v1 x/n] [RESEND] foo: do foo
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When we aggregate trailers, make sure that we track their originating
messages so we can properly check attestation on all of them.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Nothing really different in 0.3.0, just a few cleanups.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
The h= field headers may not be lowercased, so make sure we handle that
when looking if the date header is signed.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Fix logic error where we incorrectly reported "No key" when it was
actually "BADSIG".
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We always want the datetime object to be tz-aware, but certain Date:
header formats result in timezone-naive variants. For those cases, just
pretend it's UTC, as that's sufficiently accurate for our purposes.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Catch KeyError instead of backtracing.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Remember to remove the temporary mbox if we're done with it.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
I expect that we'll have better keyring management tooling in the
future, but for now show some rudimentary information about patatt keys
used in a thread via --show-keys, e.g.:
b4 mbox --show-keys 20210511143536.743919-1-konstantin@linuxfoundation.org
b4 mbox --show-keys 20210507181322.172569-1-konstantin@linuxfoundation.org
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Many DKIM signatures just sign the Date: field and do not include the t=
timestamp. Properly handle this situation when we're checking for drift.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Looks like we lost this feature in the rewrite, so reimplement it again.
This commit also removes obsolete configuration options and sets the
default attestation check level at "softfail".
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Looks like subscripting list[] and dict[] for typing hints is not
supported in python-3.6.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
This has moved into patatt, so no need to duplicate functionality.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Move end-to-end attestation code into its own library: patatt. See
https://git.kernel.org/pub/scm/utils/patatt/patatt.git/about/
It is included into b4 as a submodule, but you will need to init it
first:
git submodule update --init
This change significantly simplifies our attestation code, dropping
thousands of lines of rather hairy code. Notably, patatt-style
attestation is incompatible with previous attestation implementations
done directly in b4, but that's just as well -- we've always marked it
as "experimental" and the lack of adoption was proving that we weren't
on the right path.
Next to come is keyring management and documentation.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
The install_requires entries use a compatible release operator. As an
example, "requests~=2.24.0" maps to a requirement of ">= 2.24.0 and ==
2.24.*". With the current version of requests (2.25.1), this leads to
a ContextualVersionConflict failure at runtime.
Allowing only Z to tick in version X.Y.Z seems unnecessarily strict
unless there are known problems with a particular release, and it
makes it more difficult for distributions to package b4. Drop the
trailing digit from all of the version identifiers, allowing both Y
and Z to increase.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If we clean the to/cc headers to get rid of all unicode escaping, we run
into a Python bug that is unable to properly parse addresses, e.g.:
In [5]: from email import utils
In [6]: utils.getaddresses(['foo <foo@bar.com>'])
Out[6]: [('foo', 'foo@bar.com')]
In [7]: utils.getaddresses(['Shuming [范書銘] <shumingf@realtek.com>'])
Out[7]:
[('', 'Shuming'),
('', ''),
('', '范書銘'),
('', ''),
('', 'shumingf@realtek.com')]
If we store the headers as-is from the original message, we are less
likely to run into this bug, as all non-ascii sequences should be
qp-escaped in the original headers:
=?big5?B?U2h1bWluZyBbrVOu0bvKXQ==?= <shumingf@realtek.com>
This doesn't fix the underlying bug in Python, but works around it.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When saving to a maildir, add option to filter out dupes. Note, that
this requires going through the entire maildir to collect message-ids,
so it's not going to be a great experience on large maildirs.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When -o is a valid maildir, then instead of saving an .mbox file add
messages to the maildir instead. This should allow "b4 mbox" to quickly
add threads to existing mail spools.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When we come across a pull request that doesn't list its base (i.e. not
generated using git-request-pull), we try to figure out the base
ourselves by doing merge-base. However, if the pull request is already
merged, then that is going to be a useless operation, so recognize this
situation and bail out early.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
It's a bad habit to exit anywhere other than from main() anyway. I
should fix all cases of that in order to be both more pythonic and
library-friendly.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Public-inbox emits mboxrd, but Python only understands mboxo, so we need
to convert from mboxrd to mboxo before passing the retrieved results to
mailbox.mbox.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=whRm2sKHeY-YQqxEJF=d9fGhnU2ajJs9i7CKC4feuPMTA@mail.gmail.com
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We probably want to be able to tweak the output of git-format-patch
based on which list we're running it for (e.g. passing --minimal or
--histogram), so make it possible to pass extra parameters to the git
command.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If we're not passing -g to "b4 pr -e", then we should try to see if we
are inside a git checkout and use that as our source.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Two services we'll be running in the near future:
1. Transparency log for all pull requests
2. Auto-exploder for pull requests that can send auto-exploded patches
to all the same recipients.
This requires quite a bit more testing and refinement, but the core of
the functionality is there.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
The reason alsa-devel DKIM verification is failing is because the
List-Archive header is included in the hashed value. This header is
added by public-inbox to all messages retrieved via the API, so try
ejecting those headers and retrying verification.
Link: https://public-inbox.org/meta/20201210202145.7agtcmrtl5jec42d@chatter.i7.local
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We only need to check against the list of known non-person trailers if
we're looking at follow-up messages. Any trailers we see in the actual
commit messages can be taken at their face value.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Looks like BugLink: is a trailer used by Intel.
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Open the development round for 0.7.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
DKIM verification is a very useful feature for b4, so let's make it a
requirement for anything installed from pip, since it's a simple enough
operation.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Something I should have found out before I tagged 0.6.0.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
I think it's time to unleash this on the wider audience.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
dkim.verify will only try the topmost DKIM-Signature header, so in case
of a failure, pop the failed header and retry with the next one (if
any).
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
PyCharm is warning that the list item can be None, but we already check
for that, so silence the warning.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If the message with a follow-up trailer did not include a DKIM
signature, we didn't show it in the report for added trailers (we were
still adding it to the resulting message).
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Some subjects are still too long and hit FS file length limits. Since
they are supposed to be human-friendly anyway, limit them by 100
characters.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Looks like it's not properly rendering on git.kernel.org.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
I didn't like it as a separate header, so move it back into the
X-Patch-Hashes header, but only add it if it's present.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
We're no longer returning here, so we need to flip our logic around.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Patches created with quilt will have no indexes, so git patch-id is
refusing to generate a hash for them (somehow, though why?). At any
rate, don't give up on attesting these patches even without the git's
patch-id.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Since we now include the message object into the followup-trailer list
(for DKIM verification purposes), we no longer auto-dedupe duplicate
trailers. Add some extra logic to handle that.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
If we don't have dnspython, then we don't have _resolver. Make sure it
exists and check if it's not None before looking for hasattr.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When I changed auto_locate_series to return the exact patch number in
addition to the matching commit_id, I introduced an off-by-one that
caused all tracked series to start matching.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
Make sure we always create a Date: header, and that we're not crashing
when we try to parse a message without a Date: header.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
55913ca (man: Drop the apostrophe from the linkmask configuration,
2020-06-25) removed a spurious apostrophe in the linkmask value. Do
the same for the midmask value.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
|
|
Now that we always create a strict-threaded file, always clean it up
after we are done.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|
|
When passing a local mbox, don't assume that it is going to contain a
strict thread already -- it can be just a local mailbox via something
like mbsync. This grabs actual thread from the mailbox before looking at
individual messages.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
|